Users who know the product of fiberglass asphalt shingles know that the standard thickness is 2.6mm, and the error is within ±1mm. This thickness belongs to the standard thickness of fiberglass asphalt shingles, which can effectively ensure the performance of asphalt shingles.
Ornice asphalt shingle manufacturers often encounter users who inquire about the thickness of asphalt shingles. Today I tell you that the thicker the better, because the quality of the glass fiber asphalt shingle depends on the support of the glass fiber tire. If the thickness is Too thick will cause poor contact between the asphalt layer and the fiberglass tire. Due to objective factors such as climate, the colored sand on the surface will fall off, which will affect the quality of the product. Therefore, it is recommended that you buy the fiberglass asphalt shingle with the thickness of the national standard.
How to distinguish between good and bad fiberglass asphalt shingles?
1. National standard thickness standard
2. The surface is flat and the asphalt is not exposed.
3. The colored sand will not continue to fall off after removing the floating sand.
4. Asphalt has no pungent odor, and the tiles are torn apart without a ribbed carcass.
Regarding the size, thickness, performance and other aspects of fiberglass asphalt shingles, there are corresponding quality standards. Therefore, regardless of whether you are familiar with fiberglass asphalt shingles, it is recommended that you understand the relevant standards before purchasing.
